Teejet CenterLine User Guide v2.02 Uživatelský manuál Strana 9

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 47
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 8
CenterLine 2.02
98-05054 R6
5
CHAPTER 2 - SETUP
It is assumed that the CenterLine system has been properly installed. Refer to the following Center-
Line diagrams for system configuration.
QUICK START GUIDE
First Time Start-Up Sequence
1. Turn ON power to CenterLine.
2. The lightbar will perform a start-up sequence.
3. The lightbar will display the current software version.
4. The lightbar will display <START>.
5. Using the Arrow buttons, scroll until <SETUP> is displayed on the lightbar. Press the
Enter button.
6. Configure the CenterLine system by choosing the appropriate settings under <GUID-
ANCE>, <LIGHTBAR>, and <SYSTEM>. It is important to enter the correct swath width for
operation.
7. Use the Arrow buttons to locate <TO START>. Press the Enter button. The operator will
return to the main menu.
8. Once <START> is displayed on the lightbar, press ENTER to begin operation.
Typical Start-Up Sequence
1. Turn ON power to CenterLine.
2. The lightbar will perform a start-up sequence.
3. The lightbar will display the current software version.
4. The lightbar will display <START>.
5. <START> will remain visible on the lightbar until the Enter button is pressed to begin oper-
ation or the Arrow buttons are pressed to select a menu option.
Arrow buttons
Enter button
Zobrazit stránku 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 46 47

Komentáře k této Příručce

Žádné komentáře